Command Line Interface Reference Guide HP BladeSystem PC Blade Switch

HP PC Blade Switch CLI Reference Guide www.hp.com 8-3
Ethernet Configuration Commands
shutdown
The shutdown Interface Configuration (Ethernet, port-channel) mode command disables an
interface. To restart a disabled interface, use the no
form of this command.
Syntax
shutdown
no shutdown
Parameters
There are no parameters for this command.
Default Setting
The interface is disabled.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
Command Usage
There are no user guidelines for this command.
Example
The following command disables Ethernet port e45 operations.
The following command restarts the disabled Ethernet port.
Console(config)# interface ethernet e45
Console(config-if)# shutdown
Console(config)# interface ethernet e45
Console(config-if)# no shutdown