Administrator's Guide HP Session Allocation Manager (SAM) v.2.1

●
EnablePassword—integer value, 0 or 1. When set to 1, shows the Password box on the access
device user interface. When set to 0, the password box is not available. Default is 1.
●
UILanguage—language identifier. Supported identifiers include:
◦
EN = English
◦
FR = French
◦
DE = German
◦
JA = Japanese
◦
KO = Korean
◦
ZH-CN = Simplified Chinese
If the identifier is not supported or the property is not present in the configuration file, the application
defaults to US English. A language support DLL must be present to support the language. Not valid
for Windows CE.
NOTE: The UILanguage specified must either be the same language as the HP SAM client
application that you have installed or English. If you installed the English HP SAM client application,
do not change the value to any other language. To minimize disk space, the English HP SAM client
application does not contain any other HP SAM client language DLL.
●
EnableServer—integer value, 0 or 1. If set to 1, the SAM Server box on the main application dialog
is visible. If set to 0, the field is not displayed. If the field is turned off, the value is still required and
must be defined in the configuration file. Default is 1.
Policy Entries
You can set policy entries by manually editing the .SAM file. These settings must be located in the
Policies section of the .SAM file.
●
Protocol—integer value, 0, 1, or 3. Specify which protocol to use for connection. RDP is 1, RGS
is 3. A value of 0 (automatic) uses autodetected settings, with a preference of RGS over RDP.
Default is 0.
●
Sound—integer value, 0 or 2. If 0, audio is played on the user’s access device. If 2, no audio is
played. Only read if the Mute definition does not exist. This is an obsolete value that the Mute value
has replaced. However, it is maintained for backward compatibility.
●
Mute—0 or 1. If 0, audio is enabled for this connection. If 1, audio is disabled. Default is 0.
●
SoundQuality—integer value, 1, 2. or 3. Set to 1 for lowest 3 for highest sound quality. This value
is only supported for RGS connections. Default is 2.
●
SoundStereo—0 or 1. If 1, stereo sound is supported. If 0, mono sound is played. This value is
only supported for RGS connections. Default is 1.
●
BordersEnabled—integer value, 0 or 1. If 1, enables normal Windows borders. 0 = no borders.
This value is only supported for RGS connections. Default is 1.
●
WindowSnapEnabled—integer value, 0 or 1. If 1, allows window to “snap” to edge of screen. This
value is only supported for RGS connections. Default is 1.
●
AudioFollowsFocus—integer value, 0 or 1. If 0, sound from all sessions is audible. If 1, only
audible sound is from session that has focus. This value is only supported for RGS connections.
Default is 0.
Install and Validate the HP SAM Client Software 23