Brocade Network Advisor SAN User Manual v12.0.0 (53-1002696-01, April 2013)

ManualsBrandsHP ManualsSoftwareHP B-series SAN Network Advisor Software

891

892

893

894

895

896

897

898

899

900

Brocade Network Advisor SAN User Manual 847

53-1002696-01

Cascaded FICON fabric merge

Resolving merge conflicts

You can resolve the following types of switch configuration conflicts:

• Domain ID

• TOV

• Buffer To Buffer Credit

• Disable Device Probe

NOTE

This test will be skipped if all primary and secondary fabric switches are found to be Fabric OS

v7.0 and above.

• Route Priority Per Frame

• Sequence Level Switching

• Suppress Class F

• Long Distance Setting

• Data Field Size

• VC Priority

Note that not all tests support resolution. If a test supports resolution, the Description column

contains the text 'Resolvable'.

To resolve merge conflicts, complete the following steps.

1. Select the failed test where the Description column contains the text 'Resolvable'.

2. Click Resolve.

A “The switches in fabric Name will be disabled prior to making the configuration change. The

switches will be reenabled after the configuration changes are applied. Please confirm to

proceed.” warning message displays.

3. Click OK on the warning message.

The values of the Fabric chosen on the Set up merge options screen are applied to all devices

in the second fabric. Once the settings are applied the test is run again and the merge results

are updated.

If the test passes, go to step 4.

If an error occurs, an error message displays. You must use Web Tools or the CLI to resolve this

conflict. Click OK on the error message and go to step 4.

If you are resolving a domain ID error, there may be multiple switches involved. If multiple

switches have the domain ID error, the Configure Domain IDs dialog box displays listing all

devices that have domain ID conflict.

a. Select the device you want to resolve the domain ID for in the Available Switches table and

click the right arrow button.

b. Select a new domain ID for the device from the Domain ID list.

c. Repeat steps a and b for each device in the Available Switches table.

d. Click OK on the Configure Domain IDs dialog box.

4. Repeat step 1 through step 3 until all resolvable tests pass.