Brocade Network Advisor SAN User Manual v12.0.0 (53-1002696-01, April 2013)

Brocade Network Advisor SAN User Manual 557
53-1002696-01
Steps for connecting to an ESKM/SKM appliance
20
• If you change the user name and password, the keys created by the previous user become
inaccessible. The Brocade group user name and password must also be changed to the
same values on ESKM/SKM to make the keys accessible.
• When storage is moved from one encryption group to another, and the new encryption
group uses a different user name and password, the Brocade group user name and
password must also be changed to the same values on ESKM/SKM to make the keys
accessible.
Setting up the local Certificate Authority (CA) on ESKM/SKM
To create and install a local CA, complete the following steps:
1. Log in to the ESKM/SKM management web console using the admin password.
2. Select the Security tab.
3. Under Certificates & CAs, click Local CAs.
4. Enter information required by the Create Local Certificate Authority section of the window to
create your local CA.
- Enter a Certificate Authority Name and Common Name. These may be the same value.
- Enter your organizational information.
- Enter the Email Address to receive messages for the Security Officer.
- Enter the Key Size. HP recommends using 2048 for maximum security.
- Select Self-signed Root CA.
- Enter the CA Certification Duration and Maximum User Certificate Duration. These values
determine when the certificate must be renewed and should be set in accordance with
your company's security policies. The default value for both is 3649 days.
5. Click Create.
The new local CA displays under Local Certificate Authority List (Figure 198).
NOTE
Fabric OS 7.1.0 will use SHA256 signatures for the TLS certificates used to connect to the ESKM 3.0.