Brocade Network Advisor SAN User Manual v12.0.0 (53-1002696-01, April 2013)

476 Brocade Network Advisor SAN User Manual
53-1002696-01
Switch, port, and LAG deployment
16
For LAGs:
• LAG attributes (Interface Mode, etc.)
• QoS, DCB Map / Traffic Class Map
• LLDP Profiles
9. Click to move the available targets selected for configuration deployment to the Selected
Targets list.
10. Click OK.
The Deployment Status dialog box launches.
11. Click Start on the Deployment Status dialog box to save the changes to the selected devices.
12. Click Close to close the Deployment Status dialog box.
Source to target switch Fabric OS version compatibility for deployment
Table 61 lists the restrictions that exist when deploying source switches to target switches.
TABLE 61 Source to target switch Fabric OS version compatibility
Source Fabric OS version and device Target Fabric OS version supported Comments
Brocade 8000 DCB switch and
FCOE10-24 DCB blade with Fabric
OS version 6.4.2 or earlier.
Allows Brocade 8000 DCB switch
and FCOE10-24 DCB blade with
Fabric OS version 6.4.2 or earlier.
Excludes Brocade Converged 10
Gbe switch module for IBM
BladeCenter with Fabric OS
6.3.1_cee, Fabric OS 6.4.1_fcoe,
and Fabric OS 6.3.1_dcb.
You cannot copy legacy
configurations to Fabric OS version
7.0 switches, because these
switches support FCoE maps and
can have only one default DCB map.
Legacy Fabric OS switches,
however, can have more than one
default map.
Brocade FCOE10-24 DCB blade with
Fabric OS 6.4.1_fcoe
Allows FCOE10-24 DCB blade with
Fabric OS 6.4.1_fcoe or Fabric OS
7.0.0 .
Allows Brocade Converged 10 Gbe
switch module for IBM BladeCenter
with Fabric OS 6.3.1_cee or Fabric
OS 6.3.1_dcb.
Excludes Brocade 8000 DCB switch
and FCOE10-24 DCB blade with
Fabric OS 6.4.2 or earlier.
Both the source and the target
support only one default DCB map.
You can copy QoS, LLDP, and
802.1x configurations from the
source to the target.
Brocade 8000 DCB switch
FCOE10-24 DCB blade with Fabric
OS 7.0.
Allows Brocade 8000 DCB switch
and FCOE10-24 DCB blade with
Fabric OS 7.0.0.
Excludes all others.
VLAN classifiers are supported, but
the FCoE map is not supported on
Fabric OS 7.0.0.