Brocade Network Advisor SAN User Manual v12.0.0 (53-1002696-01, April 2013)

442 Brocade Network Advisor SAN User Manual
53-1002696-01
DCB Configuration
16
DCB Configuration
To launch the DCB Configuration dialog box, select Configure > DCB from the menu bar.
The DCB Configuration dialog box displays, showing the status of all DCB-related hardware and
functions.
NOTE
The Protocol Down Reason column, shown in Figure 150, displays the values only for the external
ports of embedded platforms but not for the internal ports.
FIGURE 150 DCB Configuration dialog box
Minimum DCB configuration for FCoE traffic
You must complete the following procedures to create the basic configuration of DCB for FCoE
traffic.
NOTE
This section is applicable for Fabric OS versions 6.3.0, 6.3.1, 6.3.2, 6.4.1, and 6.4.2. This section is
not applicable for Fabric OS versions 6.3.1_dcb, 6.3.1_cee, 6.4.1_fcoe, or 7.0.x.