Brocade Network Advisor SAN User Manual v12.0.0 (53-1002696-01, April 2013)

Brocade Network Advisor SAN User Manual 323

53-1002696-01

SMI Agent Configuration Tool

2. Select the Client or Indication from the Authentication list.

The appropriate certificates display in the Certificates list.

3. Enter the full path or browse to the certificate you want to import (for example, on Windows the

path is C:\Certificates\cimom-indication-auth2.cer and on Linux the path is

opt/Certificates/cimom-indication-auth2.cer).

You can only import certificate files with the CER extension (.cer).

4. Enter a name for the certificate in the Certificate Name field.

5. Click Import.

The new certificate displays in the Certificates list and text box.

If the certificate location is not valid, an error message displays. Click OK to close the message

and reenter the full path to the certificate location.

If you did not enter a certificate name, an error message displays. Click OK to close the

message and enter a name for the certificate.

If the certificate file is empty or corrupted, an error message displays. Click OK to close the

message.

6. Click Close to close the SMIA Configuration Tool dialog box.

Viewing a certificate

NOTE

You must have SMI Operation Read and Write privileges to view the Certificate Management tab. For

more information about privileges, refer to “User Privileges” on page 1097.

To view a certificate, complete the following steps.

1. Select Client or Indication from the Authentication list.

The appropriate certificates display in the Certificates list.

2. Select the certificate you want to view in the Certificates list.

The certificate details display in the Certificates text box.

3. Click Close to close the SMIA Configuration Tool dialog box.

Exporting a certificate

NOTE

You must have SMI Operation Read and Write privileges to view or make changes to the Certificate

Management tab. For more information about privileges, refer to “User Privileges” on page 1097.