Brocade Network Advisor SAN User Manual v12.0.0 (53-1002696-01, April 2013)

302 Brocade Network Advisor SAN User Manual
53-1002696-01
AAA Settings tab
11
9. Set the fall back condition to secondary authentication by selecting one of the following
options from the Fail Over Option list:
• TACACS+ Server Not Reachable
• TACACS+ Server Authentication Failed
10. Set the authorization preference by selecting one of the following options from the
Authorization Preference list:
• Local Database
• Primary Authentication Server
11. Click Apply to save the configuration.
To display the authentication audit trail, refer to “Displaying the client authentication audit
trail” on page 305.
12. Click Close to close the Server Management Console.
Configuring a TACACS+ server
To add or edit a TACACS+ server, complete the following steps.
1. Choose one of the following options from the AAA Settings tab:
• Click Add.
• Select an existing TACACS+ server and click Edit.
The Add or Edit TACACS+ Server dialog box displays (Figure 108).
FIGURE 110 Add or Edit TACACS+ Server
2. Enter the TACACS+ server’s hostname in the Network Address field.
If DNS is not configured in your network, provide an IP address instead of the hostname.
3. Enter the TCP port used by the TACACS+ server in the TCP Port field.
Default is 49.
4. Enter the shared secret in the Shared Secret and Confirm Secret fields.
5. Enter the timeout timer value (in seconds) that specifies the amount of time to wait between
retries when the server is busy in the Timeout (Sec) field.
Default is 3 seconds.