Brocade Network Advisor SAN User Manual v12.0.0 (53-1002696-01, April 2013)

242 Brocade Network Advisor SAN User Manual
53-1002696-01
SAN tab overview
9
Product List
The Product List, located on the SAN tab, displays an inventory of all discovered devices and ports.
The Product List is a quick way to look up product and port information, including serial numbers
and IP addresses.
To display the Product List, select View > Show Panels > Product List or press F9.
You can edit information in the Product List by double-clicking in a field marked with a green
triangle. You can sort the Product List by clicking a column heading.
The following columns (presented here in alphabetical order) are included in the Product List.
• Additional Port Info — Displays additional port information.
• All Levels — Displays all discovered fabrics, groups, devices, and ports as both text and icons.
Also, displays the status of the fabrics, groups, devices, and ports. For a list of icons that
display in the All Levels column, refer to the following tables:
- “SAN product icons” on page 248
- “SAN group icons” on page 249
- “SAN port icons” on page 250
• Additional Port Info — Displays additional information about the port.
• Attached Port # — Displays the number of the attached port.
• BB Credit — Displays the BB Credit of the port.
• Class — Displays the class value of the FICON device port.
• Contact — Displays the name of the person or group you should contact about the product. This
field is editable at the fabric level.
• Description — Displays the description of the product. This field is editable at the fabric level.
• Product Type — Displays the type of product.
• Domain ID — Displays the Domain ID for the product in the format xx(yy), where xx is the
normalized value and yy is the actual value on the wire.
• FC Address — Displays the Fibre Channel address of the port.
• Firmware — Displays the firmware version of the product.
• IP Address — Displays the IP address (IPv4 or IPv6 format) of the product.
• Location — Displays the physical location of the product. This field is editable at the fabric level.
• Model — Displays the model number of the product.
• Name — Displays the name of the product or port. This field is editable at the fabric, device,
and port level.
• Port # — Displays the number of the port.
• Port Count — Displays the number of ports on the product.
• Port Type — Displays the type of port (for example, expansion port, node port, or NL_port).
• Protocol — Displays the protocol for the port.
• Serial # — Displays the serial number of the product.
• Speed Configured (Gbps) — Displays the actual speed of the port in Gigabits per second.
• State — Displays the state for the product and the port.
• Status — Displays the status for the product and the port.