Brocade Network Advisor SAN User Manual v12.0.0 (53-1002696-01, April 2013)

216 Brocade Network Advisor SAN User Manual
53-1002696-01
Performance Dashboard monitors
8
Top Product CPU Utilization monitor
The Top Product CPU Utilization monitor (Figure 76) displays the top product CPU utilization
percentages in a table.
FIGURE 76 Top Product CPU Utilization monitor
The Top Product CPU Utilization monitor includes the following data:
• Severity icon/monitor title — The worst severity of the data shown next to the monitor title.
• Product — The product affected by this monitor.
• Min — The minimum value of the measure in the specified time range.
• CPU Utilization Percentage — The CPU utilization percentages.
• Max — The maximum value of the measure in the specified time range.
• Fabric — The fabric to which the device belongs.
• Product Type — The type of product (for example, switch).
• State — The product state (for example, Offline).
• Status — The product status (for example, Reachable).
• Tag — The product tag.
• Serial # — The serial number of the product.
• Model — The product model.
• Port Count — The number of ports on the product.
• Firmware — The firmware level running on the product.
• Location — The location of the product.
• Contact — A contact name for the product.
• Refreshed — The refresh time and selected time range for the monitor.
To customize the monitor to display data by a selected time frame as well as customize the display
options, refer to “Editing a preconfigured performance monitor” on page 220.