Brocade Network Advisor SAN User Manual v12.0.0 (53-1002696-01, April 2013)

Brocade Network Advisor SAN User Manual 207
53-1002696-01
Performance Dashboard monitors
8
Top Port C3 Discards RX TO monitor
The Top Port C3 Discards RX TO monitor (Figure 67) displays the top ports with receive Class 3
frames received at this port and discarded at the transmission port due to timeout in a table.
FIGURE 67 Top Port C3 Discards RX TO monitor
The Top Port C3 Discards RX TO monitor includes the following data:
• Severity icon/monitor title— The worst severity of the data shown next to the monitor title.
• Port — The port affected by this monitor.
• C3 Discards RX TO/sec — The top ports with receive Class 3 frames received at this port and
discarded at the transmission port due to timeout in seconds.
• Product — The product affected by this monitor.
• Type — The type of port (for example, U-Port).
• Identifier — The port identifier.
• Port Number— The port number.
• State — The port state (for example, Enabled).
• Status — The port status (for example, Up).
• Refreshed — The refresh time and selected time range for the monitor.
To customize the monitor to display data by a selected time frame as well as customize the display
options, refer to “Editing a preconfigured performance monitor” on page 220.
Accessing additional data from the Top Port C3 Discards RX TO monitor
• Right-click a row in the monitor to access the shortcut menu available for the associated
device. For more information about shortcut menus, refer to “SAN shortcut menus” on
page 1071.
• In a Top N or Bottom N C3 Discards TX TO and C3 Discards RX TO monitors, right-click an
FC-port row and select Discarded Frames to navigate to the Discarded Frames dialog box. For
more information, refer to “Viewing discarded frames from a port” on page 352.