Brocade Network Advisor SAN User Manual v12.0.0 (53-1002696-01, April 2013)

130 Brocade Network Advisor SAN User Manual
53-1002696-01
Software Configuration
5
5. Enter a port number in the Starting Port # field.
The default is 24600.
For Professional, the server requires 15 consecutive free ports beginning with the starting port
number.
For Trial and Licensed versions, the server requires 18 consecutive free ports beginning with
the starting port number.
6. Click Apply or OK to save your work.
NOTE
Changes to this option take effect after application restart.
7. Cl ic k OK on the “changes take effect after application restart” message.
Support mode settings
You can configure support settings to allow enhanced diagnostics.
Configuring support mode settings
To configure support mode settings, complete the following steps.
1. Select Server > Options.
The Options dialog box displays (Figure 45).
2. Select Support Mode in the Category list.
NOTE
Only use this option when directed to by customer support.
The Support Mode pane displays (Figure 44).
FIGURE 45 Options dialog box (Support Mode pane)
3. Select the Log client support data - Log Level list, and select the type of log data you want to
configure.
Log level options include: All, Fatal, Error, Warn, Info, Debug, Trace, and Off. Default is Info.
4. Select the Log server support data - Log Level list, and select the type of log data you want to
configure.
Log level options include: All, Fatal, Error, Warn, Info, Debug, Trace, and Off. Default is Info.