Brocade Network Advisor SAN User Manual v12.0.0 (53-1002696-01, April 2013)

Brocade Network Advisor SAN User Manual 1197
53-1002696-01
Database tables and fields
H
RECOVERY_SET_SIZE No longer used. Previously used to indicate the
number of smart cards used to back up a Master Key.
The number of cards is now specified when the
backup is created, and not persisted in the database.
The default value is 0.
smallint
KEY_VAULT_TYPE Indicates the type of key vault used by switches in this
Encryption Group.
0 = Decru Lifetime Key Manager (LKM),
1 = RSA Key Manager (RKM),
2 = Brocade internal key storage (for demo use only).
The default value is 0.
smallint
PRIMARY_KEY_VAULT_ID Foreign key reference to the KEY_VAULT record that
describes the primary key vault for
this Encryption Group. Null if no primary key vault is
configured.
int
BACKUP_KEY_VAULT_ID Foreign key reference to the KEY_VAULT record that
describes the backup key vault for
this Encryption Group. Null if no backup key vault is
configured.
int
GROUP_LEADER_STATUS Stores the status of the Group leader node int
SRDF_MODE This field denotes whether the SRDF support is
enabled or not. Feature available only from 6.4
release onwards and for RSA key vaults.
EncryptionGroup collector and EncryptionGroupBean
fills in this value.
The default value is -1.
smallint
TABLE 93 ENCRYPTION_GROUP_MEMBER
Field Definition Format Size
ID Unique generated database identifier. int
ENCRYPTION_GROUP_ID Foreign key reference to the ENCRYPTION_GROUP
record that identifies the encryption group that this
member switch belongs to
int
MEMBER_IP_ADDRESS The management IP address (IPv4, IPv6, or
hostname) of the member switch
varchar 128
MEMBER_WWN the node WWN of the member switch char 23
MEMBER_STATUS The reachability status of the member switch as seen
by the group leader switch. For possible values see
the enum definition in the DTO class
smallint
TABLE 92 ENCRYPTION_GROUP (Continued)
Field Definition Format Size