Brocade Network Advisor SAN User Manual v12.0.0 (53-1002696-01, April 2013)

1070 Brocade Network Advisor SAN User Manual
53-1002696-01
SAN main menus
A
Port Optics (SFP) — Select to display the properties
associated with a selected small form-factor pluggable
(SFP) transceiver on the selected device.
SNMP Setup — Select to configure SNMP traps.
Trap Forwarding — Select to configure trap forwarding.
Product Trap Recipients — Select to register a host as a
trap recipient.
Event Reception — Select to configure the server to
accept or drop traps and specify SNMP credentials and
community strings, which are required to decode traps on
receiving them.
Informs — Select to enable or disable SNMP informs on
the device.
Syslog Configuration — Select to configure Syslog for the
Management server.
Syslog Forwarding — Select to configure Syslog
forwarding.
Product Syslog Recipients — Select to register a host as a
syslog recipient.
Technical Support — Select to configure technical support
data.
SupportSave — Select to capture server and client
support data.
Product/Host SupportSave. (Fabric OS devices only)
Select to configure technical support data collection.
Upload Failure Data Capture — Select to configure
capture failure data for Fabric OS devices.
View Repository — Select to view repository data.
Troubleshooting — Select to troubleshoot your SAN.
FC — Select how to troubleshoot FC by choosing one of
the following options:
• FC Trace Route — Select to view the route
information between two device ports.
• Device Connectivity — Select to view the connectivity
information for two devices.
• Fabric Device Sharing. (Trial and Licensed version
Only) Select to determine if the selected fabrics are
configured to share devices.
• Diagnostic Port Test — Select to run a diagnostic port
test.
Menu Command Command Options