Brocade Network Advisor SAN User Manual v12.0.0 (53-1002696-01, April 2013)

Brocade Network Advisor SAN User Manual 983
53-1002696-01
SNMP traps
32
FIGURE 424 Add Trap Filter dialog box
3. Select the SAN, IP, or Hosts tab. Depending on the tab selected, the products available to
which you can add a trap filter display in the Available Products list.
4. Enter a unique name for the trap filter in the Filter Name field.
5. Enter a general description of the trap filter in the Description field.
6. Click the Forward Application Messages check box to forward application events.
7. Click t h e Forward pseudo events check box to forward pseudo events.
8. Select a severity level from the Severity list. The severity level can be one of the following, and
appear in descending order of severity.
• Emergency
• Alert
• Critical
• Error
• Warning
• Notice
• Info
• Debug
Traps with the selected severity and those with higher severity levels are forwarded. For
example, by default, Critical severity is selected. Therefore, traps with Critical, Alert, and
Emergency severity levels are forwarded. To have all traps forwarded, select Debug, the lowest
severity level.