Brocade Network Advisor SAN User Manual v12.0.0 (53-1002696-01, April 2013)

Brocade Network Advisor SAN User Manual 981
53-1002696-01
SNMP traps
32
The SNMP Trap Forwarding dialog box, shown in Figure 422, displays.
FIGURE 422 SNMP Trap Forwarding dialog box
Adding a trap destination
The Add Trap Destination dialog box allows you to configure destinations for forwarding SNMP
traps.
1. Select Monitor > SNMP Setup > Trap Forwarding.
The SNMP Trap Forwarding dialog box, shown in Figure 422, displays.
2. Click the Enable trap forwarding check box.
3. Click Add in the Destinations area of the SNMP Trap Forwarding dialog box.
The Add Trap Destination dialog box, shown in Figure 423, displays.