.SAN design reference guide Vol. 1-5 785350-001

Table 20 B-series Fibre Channel switches
Number of PortsFabric ManagementHP switch name
32 to 512
HP Network Advisor
HP SN8000B 8-Slot SAN Backbone
Director Switch
32 to 256
HP SN8000B 4-Slot SAN Director
Switch
24 to 48
HP SN6000B 16Gb Fibre Channel
Switch
12 to 24
HP SN3000B 16Gb Fibre Channel
Switch
48 to 96HP StoreFabric SN6500B 16Gb Fibre
Channel Switch
1 to 16 internal
Brocade 16Gb SAN Switch for HP
BladeSystem c-Class
1 to 12 external
32HP StorageWorks Encryption SAN
Switch
16
HP Network Advisor
HP StorageWorks Encryption FC Blade
DCFM
1
1 to 16 internal
Brocade 8Gb SAN Switch for HP
BladeSystem c-Class
1 to 8 external
2 internal
HP StorageWorks EVA4400 Embedded
Switch Module, 8 Gb Brocade
10 external
16 to 512HP StorageWorks DC SAN Backbone
Director
8 to 24HP StorageWorks 8/8 SAN Switch
16 to 24HP StorageWorks 8/24 SAN Switch
24 to 40HP StorageWorks 8/40 SAN Switch
48 to 80HP StorageWorks 8/80 SAN Switch
16 to 256HP StorageWorks DC04 SAN Director
1
DCFM = Data Center Fabric Manager
Table 21 B-series Fibre Channel switches and routers
Number of portsFabric ManagementHP switch name
16 at 8 Gb/s Fibre Channel
6 at 1-GbE FCIP
HP Network Advisor
DCFM
1
HP StorageWorks 1606 Extension SAN
Switch
12 at 8 Gb/s Fibre Channel
10 at 1-GbE FCIP
2 at 10-GbE FCIP
HP Multi Protocol Extension Blade
HP StoreFabric Enhanced Multiprotocol
Extension Blade
2
1
DCFM = Data Center Fabric Manager
2
IPsec support for the XGEO port has been added to this blade enabling creation of IP security enabled FCIP tunnels.
FOS FOS 7.1.0a or later is required to take advantage of the enhanced IPsec capability. This feature is not enabled
when running earlier versions of FOS firmware.
94 B-series switches and fabric rules