.SAN design reference guide Vol. 1-5 785350-001

1. Create 3 VLANs (for LAN, SAN, and SAN discovery traffic).
<switchname> system-view
[switchname] vlan 1001
[switchname-vlan1001] description ToLAN
[switchname-vlan1001] quit
[switchname] vlan 4001
[switchname-vlan4001] description ToSAN
[switchname-vlan4001] quit
[switchname] vlan 3001
[switchname-vlan3001] description FIPVLAN
[switchname-vlan3001] protocol-vlan 0 mode ethernetii etype 8914
[switchname-vlan3001] quit
[switchname]
2. Configure DCBX.
[switchname] acl number 4000 name DCBX
[switchname-acl-ethernetframe-4000-DCBX] rule 0 permit type 8906 ffff
[switchname-acl-ethernetframe-4000-DCBX] rule 5 permit type 8914 ffff
[switchname-acl-ethernetframe-4000-DCBX] quit
[switchname] traffic classifier DCBX operator or
[switchname-classifier-DCBX] if-match acl 4000
[switchname-classifier-DCBX] quit
[switchname] traffic behavior DCBX
[switchname-behavior-DCBX] remark dot1p 3
[switchname-behavior-DCBX] quit
[switchname] qos policy DCBX
[switchname-qospolicy-DCBX] classifier DCBX behavior DCBX mode dcbx
[switchname-qospolicy-DCBX] quit
3. Configure ETS.
[switchname] qos map-table dot1p-lp
[switchname-maptbl-dot1p-lp] import 0 export 0
[switchname-maptbl-dot1p-lp] import 1 export 0
[switchname-maptbl-dot1p-lp] import 2 export 0
[switchname-maptbl-dot1p-lp] import 3 export 1
[switchname-maptbl-dot1p-lp] import 4 export 0
[switchname-maptbl-dot1p-lp] import 5 export 0
[switchname-maptbl-dot1p-lp] import 6 export 0
[switchname-maptbl-dot1p-lp] import 7 export 0
[switchname-maptbl-dot1p-lp] quit
4. Configure Interfaces (3 types).
• Server CNA Interfaces
[switchname] interface Ten-GigabitEthernet1/0/1
[switchname-interface Ten-GigabitEthernet1/0/1] port link-type hybrid
[switchname-interface Ten-GigabitEthernet1/0/1] port hybrid vlan 4001 tagged
[switchname-interface Ten-GigabitEthernet1/0/1] port hybrid vlan 1001 3001 untagged
[switchname-interface Ten-GigabitEthernet1/0/1] port hybrid pvid vlan 1001
[switchname-interface Ten-GigabitEthernet1/0/1] undo port hybrid vlan 1
[switchname-interface Ten-GigabitEthernet1/0/1] port hybrid protocol-vlan vlan 3001 0
[switchname-interface Ten-GigabitEthernet1/0/1] qos apply policy DCBX outbound
[switchname-interface Ten-GigabitEthernet1/0/1] lldp tlv-enable dot1-tlv dcbx
[switchname-interface Ten-GigabitEthernet1/0/1] priority-flow-control auto
[switchname-interface Ten-GigabitEthernet1/0/1] priority-flow-control no-drop dot1p 3
[switchname-interface Ten-GigabitEthernet1/0/1] qos trust dot1p
[switchname-interface Ten-GigabitEthernet1/0/1] qos wrr 7 group sp
[switchname-interface Ten-GigabitEthernet1/0/1] qos wrr 6 group sp
[switchname-interface Ten-GigabitEthernet1/0/1] qos wrr 5 group sp
[switchname-interface Ten-GigabitEthernet1/0/1] qos wrr 4 group sp
[switchname-interface Ten-GigabitEthernet1/0/1] qos wrr 3 group sp
[switchname-interface Ten-GigabitEthernet1/0/1] qos wrr 2 group sp
[switchname-interface Ten-GigabitEthernet1/0/1] qos wrr 1 group byte-count 15
[switchname-interface Ten-GigabitEthernet1/0/1] qos wrr 0 group byte-count 15
[switchname-interface Ten-GigabitEthernet1/0/1] broadcast-suppression 1
[switchname-interface Ten-GigabitEthernet1/0/1] multicast-suppression 1
FCoE switch configuration quick-setup instructions 391