.SAN design reference guide Vol. 1-5 785350-001
Table 138 Features and usage for HP supported FCIP SAN extension products (continued)
Network requirements
Recommended IP
bandwidths
(WAN)
Data compression
method/use
Supported DR
software
Inter-fabric
connectivity
Supported
fabrics
FCIP gateway
product
See Table 141 (page
287).
Low: T3/DS3 (45
Mb/s)
Hardware
VEX_Port
(LSAN fabric
isolation)
B-series
B-series 1606
Extension
SAN Switch
DC Dir Switch
MP Extension
Blade
to
Medium: OC-3
(155 Mb/s)
to
See Table 142 (page
290).
Hardware
VEX_Port
(LSAN fabric
isolation)
B-series
B-series 400
MP Router
MP Router
Blade
High: OC-6 (322
Mb/s), OC-12
(622 Mb/s) up to
1 Gb/s
See Table 143 (page
293).
VEX_Port
(LSAN fabric
isolation)
B-series
B-series MP
Router
See Table 144 (page
295).
Software (IPS-4,
IPS-8)
E_Port
(VSAN-IVR fabric
isolation)
C-series
C-series MDS
9222i,
9216i, IPS-4,
IPS-8, 14/2,
18/4
Hardware (all
others)
1
LSAN fabric isolation is available when used with B-series switches with Integrated Routing or B-series routers with FCR.
2
VSAN fabric isolation is available when used with C-series switches with inter-VSAN routing.
3
HP P9000 (XP) Continuous Access is not supported by H-series switches.
4
For compression usage recommendations, see the IP performance tuning section in the HP MPX200 Multifunction Router User Guide.
HP IP Distance Gateway (mpx110)
The HP IP Distance Gateway (mpx110) provides Fibre Channel SAN extension over an IP network.
Used in conjunction with the EVA or XP family of storage systems and Continuous Access software,
the mpx110 enables long-distance remote replication for disaster tolerance.
Table 139 (page 273) lists the features and requirements for the IP Distance Gateway.
Table 139 IP Distance Gateway (mpx110) features and requirements
RequirementsFeature
B-series switches—See “B-series Fibre Channel switches” (page 94) and “B-series
Fibre Channel switches and routers” (page 94).
Fibre Channel switches for FCIP
TCP/IP IPv4, Ethernet 10 Mb/s, 100 Mb/s, 1,000 Mb/s
IP network protocols
Requires dedicated IP bandwidth. See Table 148 (page 299), and
Table 151 (page 301).
Storage systems
• P6000 Continuous Access
• P9000 (XP) Continuous Access
• 3PAR Remote Copy
For HP P6000 Continuous Access, see the HP P6000 Enterprise Virtual Array
Compatibility Reference at http://h18006.www1.hp.com/products/storage/
software/conaccesseva/index.html.
FCIP-supported operating systems
For information about using the HP IP Distance Gateway, see http://
h18006.www1.hp.com/storage/networking/index.html.
Documentation
HP multi-protocol long-distance products 273