.SAN design reference guide Vol. 1-5 785350-001

Table 121 Online data migration operating system support
Online data migration destination storage system and
firmware (minimum)
MPX200 online data migration support
1
•
•
P2000 G3 FC (TS251P002-04)
HP-UX 11iv3, 11iv2, Clusters (Service Guard)
•
•
IBM AIX 6.1, 5.3
2
P4000 (9.0)
• P6350/P6550 (11001000)
• Microsoft Windows 2012, 2008 and 2003, Failover
Clustering and MSCS
• EVA8000/6000/4000 (6.200)
• Red Hat 6, 5 U4 , 4 U8, U7, U6, U3, Clusters (RH 6)
• EVA8100/6100/4100 (6.220)
• SUSE 11, 10 SP3, SP1, Clusters (SUSE 11 U1)
• EVA8400/6400/4400 (09522000, 09534000)
See “P6000/EVA data migration” (page 226).
• Oracle Solaris 10, Clusters 3.3
• VMware ESXi 5.0, 4.1, 4.0, Clusters
• P9500 (70-00-50-00)
• XP24000/20000 (60-06-10-00)
• XP12000/10000 (50-09-83-00)
See “P9000/XP data migration” (page 239)
• 3PAR StoreServ 10000 (3.1.1)
Note: Requires MPX200 FW 3.3.1.0 minimum.
• 3PAR StoreServ 7000 (3.1.2)
Note: Requires MPX200 FW 3.4.0.2 minimum.
• 3PAR F-Class, T-Class, 2.3.1 (MU2)
See “3PAR data migration” (page 251).
1
For operating system updates, the minimum supported version is specified.
2
IBM AIX 5.3 not supported with 3PAR OS 3.1.2 or later.
Data migration considerations
MPX200 connectivity to P9500/XP storage as a data migration destination array is obtained
through a Fibre Channel switch configured in the same fabric as the MPX200 Fibre Channel ports.
When the data migration operation is complete, server connectivity to the P9500/XP storage
system must be configured based on current P9500/XP support for operating systems, HBAs, and
multipath software. For current operating system/version and data migration storage system support,
see the SPOCK website at http://www.hp.com/storage/spock. You must sign up for an HP Passport
to enable access.
P9000/XP data migration 241