.SAN design reference guide Vol. 1-5 785350-001

For information about configuring HP StoreVirtual 4000 Storage using the Centralized Management
Console, see HP StoreVirtual 4000 Storage User Guide.
Configuration parameters
For configuration settings for Fibre Channel on HP StoreVirtual 4000 Storage, see HP StoreVirtual
4000 Storage User Guide, and configuration sets on SPOCK.
Data migration
Fibre Channel on HP StoreVirtual 4000 Storage does not currently support data migration using
the MPX200. However, data from supported Fibre Channel source arrays can be migrated to
volumes on HP StoreVirtual 4000 Storage via iSCSI.
This data migration is done using the Multifunction Router data migration feature. It provides for
block (LUN) level data movement between source and destination storage systems.
For the latest data migration storage system, operating system, and version support, see the SPOCK
website at http://www.hp.com/storage/spock. You must sign up for an HP Passport to enable
access.
Zoning
These zoning rules apply to a heterogeneous SAN with Fibre Channel on HP StoreVirtual 4000
Storage:
• Zoning by HBA is the HP recommended zoning method for Fibre Channel on HP StoreVirtual
4000 Storage. See “Configuration rules” (page 219).
• Zoning is required for all operating systems that access HP StoreVirtual 4000 Storage using
the Fibre Channel connection type. See “Heterogeneous server rules” (page 165).
• Fibre Channel on HP StoreVirtual 4000 Storage can be in multiple operating system zones.
Boot from SAN support
For current boot from SAN support, see the SPOCK website at:http://www.hp.com/storage/
spockYou must sign up for an HP Passport to enable access to SPOCK.
220 HP StoreVirtual storage system rules