.SAN design reference guide Vol. 1-5 785350-001

Table 98 Oracle Solaris storage system, HBA, and multipath software coexistence support
1
3PAR
SVSP
3.0
P9500, XP7, XP24000/20000,
XP12000/10000
P63 xx /P65 xx
EVAEVA4x00/
6x00/8x00
2
P2000 G3
MSA2000fc
G2(2300fc)
VD
4
MP
MP
VD
4, 5
MPH
VD
4
MP
MPNotes
3
DSSDSDDSSMP
P2000 G3
MSA2000fc G2
(MSA2300fc)
DSSDS—DSSMPP63xx/P65xx EVA
EVA4 x 00/
6 x 00/8 x 00
2
SD—SD—SDD
VD
4
—————S——DH
P9500, XP7,
XP24000/20000,
XP12000/10000
DSSDS—DSSMP
SD—SD—SDD
VD
4, 5
DSS—S——SSMPSVSP 3.0
—SSDS—DSSMP
3PAR
S—DSD—SDD
VD
4
1
Legend: S = same server and HBA; D = same server and different HBA; — = not supported, MP = MPxIO, SP = Secure Path, VD
= Veritas DMP, H = Hitachi Dynamic Link Manager
For more information, see the HP 3PAR Solaris Implementation Guide.
2
EVA4100/6100/8100 requires a minimum of XCS firmware 6.110.
3
General notes:
• Connection to a common server with different HBAs requires separate HBA zones for 3PAR, XP, and P6000/EVA.
• Secure Path support with the same HBA requires 3.0d minimum. If Secure Path is combined with MPxIO on the same server,
Oracle-branded HBAs are required for MPxIO.
4
When using Symantec Veritas DMP, you must add the following lines to the /kernel/drv/fp.conf file:
• fcp_offline_delay=10;
• fp_offline_ticker=50;
5
Veritas DMP is not supported with XP7
For more information about storage system coexistence, see “Heterogeneous SAN storage system
coexistence” (page 208).
206 Heterogeneous server rules