.SAN design reference guide Vol. 1-5 785350-001

Table 95 Microsoft Windows SAN configuration rules (continued)
Windows SAN rules
Storage systems
1
P6300 EVA
• Supports boot from SAN. For more information, see “P6000/EVA SAN boot support” (page 229).
P6350 EVA
• For HP P6000 Continuous Access configuration information, see “HP P6000 Continuous Access
SAN integration” (page 228).
P6500 EVA
P6550 EVA
SVSP 3.0
• Zoning is required when Windows is used in a heterogeneous SAN with other operating systems.
• In an environment with multiple Windows clusters that share a storage array, configure each cluster
and its storage in a separate zone. If the same storage array is used by multiple clusters, the storage
ports can be in an overlapping zone.
• Supports only active/passive failover mode. A multipathing driver is required.
• Supports MSCS and Microsoft Failover Clustering.
• Supports boot from SAN. For more information, see “SVSP SAN boot support” (page 248).
3PAR StoreServ
10000/7000; 3PAR
F-Class, T-Class
• Zoning by HBA is required when used in a heterogeneous SAN, including other operating systems
and other storage system families or types.
• All hosts must have the appropriate Host Operating System type parameter set (Host Persona) and
the required host settings described in the HP 3PAR Microsoft Windows Implementation Guide.
1
Unlisted but supported storage systems have no additional SAN configuration restrictions. For the latest support information, contact
an HP storage representative.
202 Heterogeneous server rules