.Part 4 SAN Extension and Bridging HP SAN Design Reference Guide 785354-001

See Figure 152 (page 349) and Figure 153 (page 349).
NOTE: HP Storage mpx Manager is required for mpx100/100b management.
Figure 152 P6000 Command View iSCSI connectivity configuration 1
FC1
FC2
GE1
GE2
MGMT
HP StorageWorks
mpx100
IOIOI
!
26484c
D1
GE1
MGMT
Discovery
IP address
Presented
iSCSI targets
D1 FP1B
FP1A
IP network
management
(WAN/LAN)
IP network
iSCSI data
(LAN/VLAN)
FC1 FC2
NIC
mpx100/100b
iSCSI initiator &
P6000
Command
View server
EVA
storage system
Figure 153 P6000 Command View iSCSI connectivity configuration 2
FC1
FC2
GE1
GE2
MGMT
HP StorageWorks
mpx100
IOIOI
!
FC1
FC2
GE1
GE2
MGMT
HP StorageWorks
mpx100
IOIOI
!
GE1
MGMT
FC1 FC2 GE1
MGMT
FC1 FC2GE2 GE2
26485c
D1
D4
D3
D2
Discovery
IP Address
Presented
iSCSI Targets
D1 FP2A
FP2B
FP2A
FP2B
D2
FP1A
FP1B
FP1A
D3
D4
FP1B
IP Network
management
(WAN/LAN)
iSCSI initiator &
P6000
Command
View server
NIC
IP Network
iSCSI data
(LAN/VLAN)
EVA
storage system
mpx100/100b 1 mpx100/100b 2
Multipath software
The EVA iSCSI Connectivity Option supports iSCSI multipath connectivity on HP OpenVMS, Microsoft
Windows with MPIO, Linux with Device Mapper, and Oracle Solaris and VMware ESX with MPxIO.
iSCSI multipath connectivity is supported on EVA4100/4400/4400 (embedded
switch)/6100/6400/8100/8400.
The EVA4400 iSCSI Connectivity Option supports iSCSI multipath connectivity on Microsoft
Windows with MPIO, Linux with Device Mapper, and Oracle Solaris and VMware ESX with MPxIO.
iSCSI multipath connectivity is supported on EVA4400 using XCS 09000000 (minimum) or
EVA4400 (embedded switch) using XCS 09003000 (minimum).
NOTE: For the latest information on version support, see the product release notes or SPOCK at
http://www.hp.com/storage/spock. You must sign up for an HP Passport to enable access.
Figure 154 (page 350) illustrates the high-availability, multipath direct connect iSCSI-Fibre Channel
attachment mode configuration with Windows MPIO.
HP iSCSI bridge products 349