.Part 3 Host and Storage System Rules HP SAN Design Reference Guide 785353-001

1
Unlisted but supported storage systems have no additional SAN configuration restrictions. For the latest support information, contact
an HP storage representative.
Table 85 HP-UX storage system, HBA, and multipath software coexistence support
1
P9500XP7
3PARSVSP 3.0
10000/12000/
20000/24000
P63 xx /P65 xx
EVA
4
EVA4 x 00/6 x 00/8 x 00
3
P2000
G3
MSA2000fc
G2
Notes
2
(MSA2300fc)
VDPLVDPLVDPLVDPLSPVDPLSPVDPLSPVDPL
—S—S—S—S——SS—SS—SPLP2000
G3MSA2000fc
G2(MSA2300fc)
S———S————S——S——S—VD
—S————————SS—SS—S
SP
4
EVA4x00/6x00/8x00
P63xx/P65xx
EVA
4
—S—S—S—S——S——S——SPL
S———S————S——S——S—VD
XP10000/12000/
20000/24000
—S—S—S————SS—SS—SPLP9500
S———S————S——S——S—VD
—————————————————SP
SVSP 3.0 —————S—S——S——S——SPL
————S————————————VD
—S—S—S—S——S——S——SPL
3PAR
S———S—S——S——S——S—VD
—S—S—S————S——S——SPL
XP7
—————————————————VD
1
Legend: D = same server and different HBA; S = same server and HBA; — = not supported; sc = single controller; SP = Secure
Path; PL = PvLinks; VD = Veritas DMP
2
General rules:
• EVA4x00/6x00/8x00 and XP24000/20000/12000/10000 require Secure Path 3.0f SP4 (or later).
• When using Secure Path and Veritas DMP, coexistence is not supported.
• HP-UX 11i v3 is supported with native multipathing. Secure Path is not required or supported. Migration from Secure Path to
native multipathing is included in HP-UX 11i v3. For more information, contact an HP storage representative .
• All HP-UX 11i v3 supported storage systems are supported on the same server and HBA using native multipathing software.
3
EVA4100/6100/8100 requires XCS firmware 6.110 or later.
4
P63xx EVAs and P65xx EVAs do not support Secure Path.
NOTE: Secure Path for HP-UX 11.23 is no longer provided through HP. The installations must
already have Secure Path for 11.23 already installed.
For more information about storage system coexistence, see “Heterogeneous SAN storage system
coexistence” (page 208).
192 Heterogeneous server rules