HP StorageWorks Fabric Interoperability: Merging Fabrics Based on C-Series and M-Series Fibre Channel Switches Application Notes (AA-RVH9J-TE, May 2008)

Introduction
20 Fabric Interoperability: Merging Fabrics Based on C-Series and M-Series Fibre Channel Switches Application Notes
MDS9509(config)#
MDS9509(config)#
MDS9509(config)# zoneset name mdscore vsan 1
MDS9509(config-zoneset)# member vz1
MDS9509(config-zoneset)# member vz2
MDS9509(config-zoneset)# member vz3
MDS9509(config-zoneset)# exit
MDS9509(config)#
At this point we have created 3 zones, vz1, vz2 and vz3. We have also created a “zoneset”
titled “mdscore”.
Now we will activate the zoneset MDSCORE
MDS9509(config)# zoneset activate name mdscore vsan 1
Zoneset Activation initiated. check zone status
MDS9509(config)#
MDS9509(config)#
MDS9509(config)# exit
Now we will view each switch in the fabric to verify the zoning we defined is in place.
MDS9509# show zoneset active vsan 1
zoneset name mdscore vsan 1
zone name vz1 vsan 1
* fcid 0x630500 [pwwn 50:06:01:60:88:02:90:cb]
* fcid 0x610400 [pwwn 10:00:00:00:c9:24:3d:90]
zone name vz2 vsan 1
* fcid 0x630400 [pwwn 10:00:00:00:c9:24:3f:75]
* fcid 0x6514e2 [pwwn 21:00:00:20:37:a7:ca:b7]
* fcid 0x6514e4 [pwwn 21:00:00:20:37:a7:c7:e0]
* fcid 0x6514e8 [pwwn 21:00:00:20:37:a7:c7:df]
zone name vz3 vsan 1
* fcid 0x651500 [pwwn 10:00:00:e0:69:f0:43:9f]
* fcid 0x6105dc [pwwn 21:00:00:20:37:28:31:6d]
* fcid 0x6105e0 [pwwn 21:00:00:20:37:28:24:7b]