HP StorageWorks Fabric Interoperability: Merging Fabrics Based on C-Series and M-Series Fibre Channel Switches Application Notes (AA-RVH9J-TE, May 2008)

Introduction
19Fabric Interoperability: Merging Fabrics Based on C-Series and M-Series Fibre Channel Switches Application Notes
Merging Zones-Examples (using the CLI /Fabric Manager from C-series switches)
In this example, we first create three zones vz1, vz2 and vz3 on one of the C-series switches
and verify these zones propagate to all the C-series and M-series switches in the
interoperating fabric.
MDS9509# config t
Enter configuration commands, one per line. End with CNTL/Z.
MDS9509(config)# zone name vz1 vsan 1
MDS9509(config-zone)# member pwwn 50:06:01:60:88:02:90:cb
MDS9509(config-zone)# member pwwn 10:00:00:00:c9:24:3d:90
MDS9509(config-zone)# exit
MDS9509(config)#
MDS9509(config)# zone name vz2 vsan 1
MDS9509(config-zone)#
MDS9509(config-zone)# member pwwn 10:00:00:00:c9:24:3f:75
MDS9509(config-zone)# member pwwn 21:00:00:20:37:a7:ca:b7
MDS9509(config-zone)# member pwwn 21:00:00:20:37:a7:c7:e0
MDS9509(config-zone)# member pwwn 21:00:00:20:37:a7:c7:df
MDS9509(config-zone)#
MDS9509(config-zone)# exit
MDS9509(config)#
MDS9509(config)# zone name vz3 vsan 1
MDS9509(config-zone)#
MDS9509(config-zone)# member pwwn 10:00:00:e0:69:f0:43:9f
MDS9509(config-zone)# member pwwn 21:00:00:20:37:28:31:6d
MDS9509(config-zone)# member pwwn 21:00:00:20:37:28:24:7b
MDS9509(config-zone)# member pwwn 21:00:00:20:37:28:22:ea
MDS9509(config-zone)# member pwwn 21:00:00:20:37:28:2e:65
MDS9509(config-zone)# member pwwn 21:00:00:20:37:28:26:0d
MDS9509(config-zone)#
MDS9509(config-zone)# exit
Domains Domain IDs restricted to 1-31 (which maps
to 97-127).
Zones and Zonesets. Only active Zone Set propagated.
All zones must be configured using pWWNs
only.
Table 2: M-Series Interoperability Mode Summary (Continued)