HP StorageWorks B-Series Remote Replication Solution Best Practices Guide (5697-6731, June 2007)

5. Ensure that port ge0 is selected and click Edit Configuration to launch the GigE Port Configuration
Wizard.
6. Click Next.
TheGigEPort#0Configuration window displays.
7. Click Add Interface, and enter the IP address and MTU size.
V alid entries are 1500 and 2250.
NOTE:
Your networ k administrator will pr ovide the MTU size.
Table 7 FCIP configuration
Examples GbE Port IP Address (local) IP Address (remote) Tunnel
First Tunnel
Ge0 10.0.10.1 10.0.10.2 0
8. Select Close > Next.
The Configure IP Routes window displays. A default route is added automatically.
9. Click Add Route andenteranewIProute.
10. Select Add > Close > Next.
The Select Tunnel window d isplays.
11 . Select the tunnel to configure and click Next.
30
Solution setup