Booting Linux x86 and x86_64 systems from a Storage Area Network with Device Mapper Multipath - Enabling the High Availability feature for Operating System Partitions (5697-0067, July 2009)

ManualsBrandsHP ManualsStorageHP B-Series Remote Replication Solutions

1

2

3

4

5

6

7

8

9

4. From the Configuration Settings menu, select Adapter Settings, and press Enter.

Figure 8

5. From the Adapter Settings menu, change Host Adapter BIOS to Enabled by pressing Enter.

Figure 9

6. Press ESC to go back to the Configuration Settings menu Figure 8

.

7. Select Selectable Boot Settings, and then press Enter.

8. From the Selectable Boot Settings menu, enable the Selectable Boot option by pressing Enter,

move the cursor to Primary Boot Port Name, LUN, and press Enter.

Figure 10

7