Booting Linux x86 and x86_64 systems from a Storage Area Network with Device Mapper Multipath - Enabling the High Availability feature for Operating System Partitions (5697-0067, July 2009)

Figure 16
5. From the Configure Adapter’s Parameters screen (Figure 16
) select option 4, Topology
Selection, (Advanced Option).
6. From the Topology Selection menu, select option 4, Fabric Point to Point. Press Esc twice.
7. From the HBA configuration menu (), select option 1, Configure Boot Devices.
8. In the Saved Boot Devices list, select 1 as the primary boot path.
Figure 17
9. At the Select Two-Digit Number of the Desired Boot Device prompt, enter the index of the
desired controller port.
11