Fabric OS Message Reference v7.0.0 (53-1002149-01, April 2011)

746 Fabric OS Message Reference
53-1002149-01
AG-1036
118
AG-1036
Message AUDIT, <timestamp>, [AG-1036], WARNING, CFG, <event-initiator-details>,
<event-location>, , Port <port> is connected to a Non-Brocade fabric with
Persistent ALPA enabled. Check the admin guide for supported configuration .
Probable Cause Indicates that one of the ports is connected to a Non-Brocade Fabric.
Recommended
Action
No action is required.
Severity WARNING
AG-1037
Message AUDIT, <timestamp>, [AG-1037], INFO, CFG, <event-initiator-details>,
<event-location>, , Trunked N_Port (<nport>) going offline, if switchshow CLI for
the connected fabric switch port displays Persistently disabled: Area has been
acquired, then check cabling: all trunked ports should be in same ASIC Port Group.
Probable Cause Indicates that the cabling is incorrect.
Recommended
Action
If the switchshow command on the connected fabric switch port displays 'Persistently disabled:
Area has been acquired', then check the cabling on the AG. All trunked ports in a single trunk
should belong to the same ASIC Port Group.
Severity INFO