Fabric OS Message Reference v7.0.0 (53-1002149-01, April 2011)

708 Fabric OS Message Reference
53-1002149-01
VS-1004
112
VS-1004
Message <timestamp>, [VS-1004], <sequence-number>,, INFO, <system-name>, !could not find
Virtual WWN config file for the switch!
Probable Cause Indicates the virtual WWN feature has been enabled for the first time on the switch or the
configuration file got accidently removed or corrupted.
Recommended
Action
Creating new default configuration file. If you want to download any of your earlier configuration for
virtual WWN feature, then use configdownload command.
Severity INFO
VS-1005
Message <timestamp>, [VS-1005], <sequence-number>,, INFO, <system-name>, !Virtual WWN
config version mismatch detected!
Probable Cause Indicates the Virtual WWN config present on the switch is not of the same FOS version.
Recommended
Action
Converting to current FOS version. No action is required.
Severity INFO
VS-1006
Message <timestamp>, [VS-1006], <sequence-number>,, INFO, <system-name>, Virtualization
services failed to initialize due to lack of enough memory.
Probable Cause Indicates that the system has run out of memory (OOM).
Recommended
Action
No action is required.
Severity INFO
VS-1007
Message <timestamp>, [VS-1007], <sequence-number>,, INFO, <system-name>, FSS Registration
failed for virtualization services.
Probable Cause Indicates failure in vsd daemon start up.
Recommended
Action
No action is required.
Severity INFO