Fabric OS Message Reference v7.0.0 (53-1002149-01, April 2011)

Fabric OS Message Reference 685
53-1002149-01
SWCH-1022
103
Recommended
Action
Load a firmware version on the standby CP that supports dynamic area on default switch, using the
firmwareDownload command.
Severity WARNING
SWCH-1022
Message <timestamp>, [SWCH-1022], <sequence-number>,, WARNING, <system-name>, Port:<port
number> have been disabled due to port address conflict while enabling FMS mode.
Probable Cause Indicates the switch has ports with FMS reserved areas (0xFE or 0xFF) which are not supported in
FMS mode.
Recommended
Action
This is a normal event; no action is required.
Refer to the Fabric OS Administrator's Guide for more information.
Severity WARNING