Fabric OS Message Reference v7.0.0 (53-1002149-01, April 2011)

Fabric OS Message Reference 653
53-1002149-01
SSMD-1008
101
SSMD-1008
Message <timestamp>, [SSMD-1008], <sequence-number>,, ERROR, <system-name>, Apptype TCAM
Table full for Slot:<slot number> chip:<Chip number in the slot>.
Probable Cause Indicates that the Apptype TCAM table is full for the chip.
Recommended
Action
Remove the unused Protocol-based VLAN classifiers and Layer 2 Extended ACLs.
Severity ERROR
SSMD-1200
Message <timestamp>, [SSMD-1200], <sequence-number>,, WARNING, <system-name>, QoS failed
programming ASIC <ASIC slot number>/<ASIC chip number> Multicast Rate Limit.
Probable Cause Indicates the DCE System Services Manager (SSM) encountered an unexpected error in
programming the dataplane ASIC for the enforcing Multicast Rate Limit feature.
Recommended
Action
Delete and reapply QoS Multicast Rate Limit policy. Restart or power cycle the switch.
Severity WARNING
SSMD-1201
Message <timestamp>, [SSMD-1201], <sequence-number>,, WARNING, <system-name>, QoS failed
programming ASIC <ASIC slot number>/<ASIC chip number> Multicast Tail Drop.
Probable Cause Indicates the DCE System Services Manager (SSM) encountered an unexpected error in
programming the dataplane ASIC for the enforcing Multicast Tail Drop feature.
Recommended
Action
Delete and reapply QoS Multicast Tail Drop policy. Restart or power cycle the switch.
Severity WARNING
SSMD-1202
Message <timestamp>, [SSMD-1202], <sequence-number>,, WARNING, <system-name>, QoS failed
programming interface 0x<Interface ID> 802.3x Pause flow control.
Probable Cause Indicates the DCE System Services Manager (SSM) encountered an unexpected error in
programming the dataplane ASIC for enforcing the interface 802.3x Pause flow control feature.
Recommended
Action
Delete and reapply QoS 802.3x Pause flow control policy. Restart or power cycle the switch.