Fabric OS Message Reference v7.0.0 (53-1002149-01, April 2011)

648 Fabric OS Message Reference
53-1002149-01
SS-1003
100
SS-1003
Message <timestamp>, [SS-1003], <sequence-number>,, WARNING, <system-name>, supportSave's
operation to USB storage device aborted.
Probable Cause Indicates a USB operation error has occurred during execution of the supportSave command.
Complete error information cannot always be displayed in this message due to possible errors in
subcommands being executed by the supportSave command.
Recommended
Action
Run the usbstorage command to check the USB storage device settings. After the USB problem is
corrected, rerun the supportSave command.
Severity WARNING
SS-1004
Message <timestamp>, [SS-1004], <sequence-number>,, WARNING, <system-name>, One or more
modules timed out during supportsave. Please retry supportsave with -t option to
collect all logs.
Probable Cause Indicates timeout in modules during supportsave.
Recommended
Action
Run supportsave -t [2-5] to collect all logs.
Severity WARNING
SS-1005
Message <timestamp>, [SS-1005], <sequence-number>,, WARNING, <system-name>, supportsave
failed for the slot <Slot Number>. Reason: No IP connection.
Probable Cause Indicates the IP connection between Active CP and the blade in the corresponding slot does not
exist.
Recommended
Action
Check for the IP connection between Active CP and the corresponding slot. Once the IP connection
gets established rerun the supportsave command.
Severity WARNING
SS-1006
Message <timestamp>, [SS-1006], <sequence-number>,, WARNING, <system-name>,supportsave
not collected for slot <Slot Number>. Reason: blade was not available to accept a
supportsave request.
Probable Cause Indicates the supportsave request was not sent to the blade in the corresponding slot.
Recommended
Action
Reboot the switch using the reboot command and then run the supportsave command.