Fabric OS Message Reference v7.0.0 (53-1002149-01, April 2011)

356 Fabric OS Message Reference
53-1002149-01
FW-1272
45
Probable Cause Indicates that the number of end-to-end (EE) word frames that the switch transmits has changed
from a value outside of the acceptable range to a value within the acceptable range. Transmit
performance messages appear due to the number of word frames that travel from the configured
S_ID to the D_ID pair.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1272
Message <timestamp>, [FW-1272], <sequence-number>,, INFO, <system-name>, <Label>, value
has changed(High=<High value>, Low=<Low value>). Current value is <Value> <Unit>.
Probable Cause Indicates that the number of frame types or commands that the port receives has changed. The
port has received small computer system interface (SCSI) Read, SCSI Write, SCSI Read and Write,
SCSI Traffic, or IP commands in a frame.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1273
Message <timestamp>, [FW-1273], <sequence-number>,, INFO, <system-name>, <Label>, is
below low boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the number of frame types or commands that the port receives has fallen below the
low boundary. The port has received a small computer system interface (SCSI) Read, SCSI Write,
SCSI Read and Write, SCSI Traffic, or IP commands in a frame.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1274
Message <timestamp>, [FW-1274], <sequence-number>,, INFO, FW, <system-name>, <Label>, is
above high boundary(High=<Filter Counter>, Low=<Low value>). Current value is
<Value> <Unit>.
Probable Cause Indicates that the number of frame types or commands that the port receives has risen above the
high boundary. The port has received a small computer system interface (SCSI) Read, SCSI Write,
SCSI Read and Write, SCSI Traffic, or IP commands in a frame.