Fabric OS Message Reference v7.0.0 (53-1002149-01, April 2011)

Fabric OS Message Reference 333
53-1002149-01
FW-1122
45
Probable Cause Indicates that the number of domain ID changes has changed. Domain ID changes occur when
there is a conflict of domain IDs in a single fabric and the principal switch has to assign another
domain ID to the switch.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1122
Message <timestamp>, [FW-1122], <sequence-number>,, INFO, <system-name>, <Label>, is
below low boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the number of domain ID changes has fallen below the low boundary. Domain ID
changes occur when there is a conflict of domain IDs in a single fabric and the principal switch has
to assign another domain ID to the switch. A low number of domain ID changes means that the
fabric is functioning normally.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1123
Message <timestamp>, [FW-1123], <sequence-number>,, INFO, <system-name>, <Label>, is
above high boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the number of domain ID changes has risen above the high boundary. Domain ID
changes occur when there is a conflict of domain IDs in a single fabric and the principal switch has
to assign another domain ID to the switch.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1124
Message <timestamp>, [FW-1124], <sequence-number>,, INFO, <system-name>, <Label>, is
between high and low boundaries(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause Indicates that the number of domain ID changes has changed from a value outside of the
acceptable range to a value within the acceptable range. Domain ID changes occur when there is a
conflict of domain IDs in a single fabric and the principal switch has to assign another domain ID to
the switch.