Fabric OS Message Reference v7.0.0 (53-1002149-01, April 2011)

320 Fabric OS Message Reference

53-1002149-01

FSSM-1004

Message <timestamp>, [FSSM-1004], <sequence-number>, SLOT cp-slot-number | CHASSIS, INFO,

<system-name>, Incompatible software version in HA synchronization.

Probable Cause Indicates that the active control processor (CP) and the standby CP in a dual CP system are running

firmware that are incompatible with each other. If the active CP fails, the failover will be disruptive.

In a switch system, this message is logged when a firmware upgrade or downgrade was invoked.

The new firmware version is not compatiable with the current running version. This causes a

disruptive firmware upgrade or downgrade.

Recommended

Action

For a dual CP system, run the firmwareDownload command to load compatible firmware on the

standby CP. For details on this command, refer to the Fabric OS Command Reference Manual.

Severity INFO