HP StorageWorks B-series Data Center Fabric Manager Enterprise, Professional Plus, and Professional 10.3.4 Release Notes (5697-0436, April 2010 - includes all 10.3.x versions)

SolutionClosed defect summary
Fixed in DCFM 10.3.0
Server Management Console (SMC) displays the Status of Services as
Unknown even after the services are restarted.
Fixed in DCFM 10.3.0
Historical Performance Data Collection uses a lot of memory and when
it is enabled and run for an extended period of time, client performance
is slow.
Fixed in DCFM 10.3.0
Purging Performance Records takes a considerable amount of time,
which affects the performance of the client. Purge must be optimized.
Fixed in DCFM 10.3.0
Old performance records are not purged due to an aging failure,
causing an increased database size. A manual purge is required.
Fixed in DCFM 10.3.0
The Names dialog displays an invalid message and you cannot view
all the imported names.
Fixed in DCFM 10.3.0
nl
Workaround prior to this version:
nl
Select Historical Data Collection > En-
able SAN Wide.
The Historical Data Collection displays Disabled even after enabling
it SAN-wide.
Fixed in DCFM 10.3.0
nl
Workaround prior to this version:
nl
Increase the dialog size to view the
Threshold Policies and edit the name
of the Duplicate Policies.
When several Threshold Policies are created, the scroll bar is missing
and incorrect names are listed for Duplicate Policies. Therefore, you
cannot view all Threshold Policies.
Fixed in DCFM 10.3.0
Fabric Watch replication randomly fails, requiring you to configure
the policies in the individual switches.
Fixed in DCFM 10.3.0
An inaccurate error message is displayed when you attempt to enable
Top Talkers in switches running firmware earlier than V6.2.
Fixed in DCFM 10.3.0
nl
Workaround prior to this version:
nl
Select and find one port at a time.
If more than one port is selected in the Available or Selected panel,
clicking Port Picker Find does not display all selected ports.
Fixed in DCFM 10.3.0
The Historical Report Destination column is blank for an F_Port connec-
ted to an Access Gateway switch. You cannot view the destination of
the F_Ports.
Fixed in DCFM 10.3.0
When Data Aging values are changed on the Server Management
Console (SMC) tab, aging cleans up the data in the 5-minute table,
but not in the 30-minute, 2-hour, or 1-day tables.
Fixed in DCFM 10.3.0
If you create a logical switch by clicking New Switch in the Logical
Switches window, Allow XISLs on the new logical switch is set to OFF,
but should be ON by default. You cannot create XISLs while creating
the logical switch in this manner.
If you use the CLI to create the logical switch, Allow XISLs is ON by
default.
Fixed in DCFM 10.3.0
If after creating four virtual fabrics on an HP StorageWorks 8/80 SAN
Switch, you delete the fourth one from the Logical Switches window,
and then attempt to create a new one, the attempt fails with a Max#
of logical switches is present on the switch error
message.
36