Brocade Network Advisor SAN User Manual v12.0.0 (53-1002696-01, April 2013)

934 Brocade Network Advisor SAN User Manual
53-1002696-01
SAN Connection utilization
29
6. Make the threshold changes by selecting one of the following options:
• To only add new thresholds, select the Keep currently set thresholds and only add new
thresholds check box.
• To overwrite all existing thresholds on all fabrics and devices, select the Overwrite all
thresholds currently set on all switches check box.
7. Cl ic k OK on the Confirm Threshold Changes dialog box.
SAN Connection utilization
NOTE
Connection utilization is only supported on the following managed objects: E_ports, F_ports,
N_ports, 10 GE_ports and FCIP tunnels.
Performance connection utilization for device ports provides the following features:
• Turns the utilization display on and off from the menu and tool bar.
• Displays moving dotted colored lines that originate from a port.
• Displays two lines in the topology (when turned on); one represents percentage utilization for
transmit and the other percentage utilization for receive. The movement of the line determines
if it is a transmit or a receive.
- Receive (Rx)—line moves into a port.
- Transmit (Tx)—line moves out of a port.
• Displays different colors to represent the percentage utilization range.
FIGURE 407 Utilization Legend
The colors and their meanings are outlined in the following table.
Line Color Utilization Defaults
Red line 80% to 100% utilization
Yellow line 40% to 80% utilization