Brocade Network Advisor SAN User Manual v12.0.0 (53-1002696-01, April 2013)

800 Brocade Network Advisor SAN User Manual
53-1002696-01
Fabric Bining overview
23
FIGURE 363 Fabric Binding dialog box
2. Review the fabric binding membership details.
• Fabric List table — Lists the fabrics in your network.
 Fabric Name — The name of the fabric.
 Fabric WWN — The world wide name of the fabric.
 Binding Status — The binding status (enabled/disabled) of the fabric.
 Enable/Disable check box — Indicates whether fabric binding is enabled. Select to
enable a fabric binding for the fabric. For step-by-step instructions, refer to “Enabling
fabric binding” on page 801 and “Disabling fabric binding” on page 802.
 Action — Displays any actions on the fabric.
• Available Switches table — Lists the switches available to add to the fabric binding
membership list. For step-by-step instructions, refer to “Adding switches to the fabric
binding membership list” on page 803.
 Name — The name of the switch fabric.
 Node WWN — The node WWN of an available or member switch.
 Domain ID — The domain ID of an available or member switch.
NOTE
You can copy (Ctrl+C) and paste (Ctrl+V) the node WWN into the Node WWN field. It does
not matter if the copy source contains colons (11:22:33:44:55:66:77), only the numbers
are pasted (11223344556677) in the Node WWN field.
 Fabric Name — The name of the fabric.
 Fabric WWN — The world wide name of the fabric.