Brocade Network Advisor SAN User Manual v12.0.0 (53-1002696-01, April 2013)

Brocade Network Advisor SAN User Manual 651
53-1002696-01
Adding target disk LUNs for encryption
20
The Encryption Disk LUN View dialog box displays (Figure 295).
FIGURE 295 Encryption Disk LUN View dialog box
The dialog box provides a convenient way to view and manage disk LUNs that are provisioned
from different hosts, identify conflicts between configuration policies on storage systems, and
to provide a launching point for the Add New Path wizard for configuring multiple I/O paths to
the LUN.
The dialog box contains the following information:
• Storage Array selector: Determines which LUN paths are displayed in the table. Enables
you to select a storage array from the LUN view prior to launching the Add New Path
wizard. Only ports that belong to at least one target container are listed.
• Host selector: Used to select a host from the LUN view prior to launching the Add New Path
wizard. Only ports that belong to at least one target container are listed.
• Encryption path table: Should be LUN/Path identified by the following:
• LUN Path Serial #
• Target Port
• Initiator Port
• Container Name
• Switch Name
• Fabric
• State
• Thin Provision LUN
• Encryption Mode
• Encrypt Existing Data
• Key ID
• Remove button: Removes a selected entry from the table.
3. Click Add to launch the Add New Path wizard.
The Select Target Port dialog box displays (Figure 296).