Brocade Network Advisor SAN User Manual v12.0.0 (53-1002696-01, April 2013)

588 Brocade Network Advisor SAN User Manual
53-1002696-01
Steps for connecting to a KMIP appliance (SafeNet KeySecure)
20
Configuring the KMIP server
1. From the KeySecure Management Console, select the Device tab, then select Device
Configuration > Key Server > Key Server.
The Cryptographic Key Server Configuration page displays (Figure 225).
FIGURE 225 KeySecure Cryptographic Key Server Configuration page
2. Under Cryptographic Key Server Settings, select KMIP as the protocol.
3. Ensure that the Use SSL check box is selected.
4. Click Edit to open a dialog box for changing IP, Port, and Server Certificate settings.
5. Verify the settings in the table are correct.