Brocade Network Advisor SAN User Manual v12.0.0 (53-1002696-01, April 2013)

582 Brocade Network Advisor SAN User Manual
53-1002696-01
Steps for connecting to a KMIP appliance (SafeNet KeySecure)
20
Creating a cluster
1. From the KeySecure Management Console, select the Device tab, then select Device
Configuration > Cluster.
The Cluster Configuration page displays (Figure 217).
FIGURE 217 KeySecure Cluster Configuration page
2. Under Create Cluster, enter a user-defined password in the fields provided, then click Create.
The Cluster Configuration page refreshes; the new cluster information is listed in the Cluster
Members table (Figure 218).
3. Verify the cluster status is shown as Active.