Brocade Network Advisor SAN User Manual v12.0.0 (53-1002696-01, April 2013)

566 Brocade Network Advisor SAN User Manual
53-1002696-01
Steps for connecting to a TEKA appliance
20
1. Log in to the Thales management program as admin and select the Network tab (Figure 200).
FIGURE 200 TEKA Network Settings
2. Enter the management IP address information under Management Interface.
3. Enter the client IP address information under KM Server Interface.
4. Enter a host name for the appliance, Internet or intranet domain, and, if used, the primary and
secondary DNS IP address under Common Settings.
5. Set Service Settings.
- HTTPS Port 433
- SSH Port 22
- Enable SSH
- KM Server Port 9000
- Enable KM Server