Brocade Network Advisor SAN User Manual v12.0.0 (53-1002696-01, April 2013)

Brocade Network Advisor SAN User Manual 469
53-1002696-01
LLDP-DCBX configuration
16
Editing an LLDP profile
1. Select Configure > DCB.
The DCB Configuration dialog box displays, showing the status of all DCB-related hardware and
functions.
2. Select a switch, and click Edit.
3. Click the LLDP-DCBX tab on the Edit Switch dialog box.
The LLDP-DCBX Profile dialog box displays.
4. Select an LLDP Profile in the LLDP Profile table.
NOTE
You can edit the <Global Configuration> profile. You cannot, however, delete or duplicate global
configurations.
5. Click the left arrow to load the LLDP Profile’s values to the left pane.
6. Modify the values, as described in “Adding an LLDP profile” on page 468. You are not allowed
to modify the LLDP Profile’s name.
7. Click the right arrow to update the LLDP Profile parameters.
8. When you have finished the configuration, click OK to launch the Deploy to Products dialog
box.
Deleting an LLDP profile
1. Select Configure > DCB from the menu bar.
The DCB Configuration dialog box displays, showing the status of all DCB-related hardware and
functions.
2. Select a switch, and click Edit.
3. Click the LLDP-DCBX tab on the Edit Switch dialog box.
4. Select an existing LLDP Profile from the LLDP Profiles table in the upper right pane.
NOTE
You cannot delete <Global Configurations>. You can, however, edit global configurations. For
more information, see “Product configuration templates” on page 1155.
5. Click the left arrow button.
The selected LLDP profile is removed from the table.
6. When you have finished the configuration, click OK to launch the Deploy to Products dialog
box.
7. Cl ic k OK.
The Deployment Status dialog box launches.
8. Click Start on the Deployment Status dialog box to save the changes to the selected devices.
9. Click Close to close the Deployment Status dialog box.