Brocade Network Advisor SAN User Manual v12.0.0 (53-1002696-01, April 2013)

438 Brocade Network Advisor SAN User Manual

53-1002696-01

FCoE licensing

The FCoE license enables Fibre Channel over Ethernet (FCoE) functionality on the following

supported DCB switches:

• Brocade 10 GbE 24-port 8 GbE 8 FC port switch

• Brocade VDX 6710, 6720, and 6730 switches

• Brocade VDX 8770-series switches

• Brocade VDX 2730 10 GbE connection blade for the Fujitsu PRIMERGY BX900 and BX400

Blade Servers

Without the FCoE license, the DCB switches are pure Layer 2 Ethernet switches and do not allow

FCoE bridging capabilities.

Save running configurations

The Save Running to Startup dialog box lists discovered DCB switches with Fabric OS version 6.3x

firmware or later. You can select available switches and move them to the Selected Switches list.

Upon startup, the DCB switch configuration is copied to the selected switches.

NOTE

The Save Running to Startup dialog box launches if there is at least one DCB switch discovered. If

no DCB switches exist, a warning dialog displays.

Copying switch configurations to selected switches

1. To access the Save Running to Startup dialog box, select Configure > Configuration > Save

Running to Startup.

The Save Running to Startup dialog box displays, as shown in Figure 149.

FIGURE 149 Save Running to Startup dialog box

2. Highlight a discovered DCB switch from the Available Switches list, and click the right arrow

button to move the switch to the Selected Switches Table.