Brocade Network Advisor SAN User Manual v12.0.0 (53-1002696-01, April 2013)

382 Brocade Network Advisor SAN User Manual
53-1002696-01
Port Auto Disable
12
• Port Type — Displays the port type.
• Port Number — Displays the port number.
• Port WWN — Displays the port world wide name.
• Port Name — Displays the port name.
• User Port # — Displays the user port number.
• PID — Displays the port identifier.
• Connected Port # — Displays the connected port number.
• Connected Port WWN — Displays the connected port world wide name.
• Connected Port Name — Displays the connected port name.
4. Click OK on the Port Auto Disable dialog box.
Configuring port auto disable triggers
NOTE
The device must be running Fabric OS 7.0 or later.
You can configure a port to become blocked when one or more of the following events occur on the
configured port:
• Loss Of Sync
• Loss OF Signal
• OLS (Offline Primitive Sequence)
• NOS (Not Operational Primitive Sequence)
• LIP (Loop Initialization Primitive Sequence)
To configure the port auto disable events, complete the following steps.
1. Select Configure > Port Auto Disable.
The Port Auto Disable dialog box displays.
2. Select the fabric on which you want to enable port auto disable (PAD) from the Fabric list.
3. Select All Ports from the Show list to filter the port list:
4. Select one or more ports or devices on which you want to enable PAD.
5. Click Configure.
The Configure Port Auto Disable dialog box displays.
6. Select one or more of the following event types:
• Port Auto Disable
• Loss Of Sync — Requires devices running Fabric OS 7.0 or later.
• Loss Of Signal — Requires devices running Fabric OS 7.0 or later.
• OLS (Offline Primitive Sequence) — Requires devices running Fabric OS 7.0 or later.
• NOS (Not Operational Primitive Sequence) — Requires devices running Fabric OS 7.0 or
later.
• LIP (Loop Initialization Primitive Sequence) — Requires devices running Fabric OS 7.0 or
later.