Brocade Network Advisor SAN User Manual v12.0.0 (53-1002696-01, April 2013)

340 Brocade Network Advisor SAN User Manual
53-1002696-01
Configuration repository management
12
Replicating security configurations
NOTE
This feature requires a Trial or Licensed version.
You can replicate an AD/LDAP Server, DCC, IP, RADIUS Server, or SCC security policy.
Select Configuration > Replicate > Security.
A wizard is launched to guide you through the process. The first step of the wizard, Overview,
displays. There are seven steps in the Replicate Switch Security Policy Configuration wizard:
1. Overview, which describes the wizard.
2. Configuration Type, which allows you to select the type of configuration you wish to replicate.
For more information about the fields and components of this step, refer to Table 44 on
page 341.
Status The operational status of the port.; for example, unknown or marginal.
Symbolic Name The symbolic name for the port.
Tag The tag number of the port
Vendor The hardware vendor’s name.
WWN The world wide name of the source switch to be replicated.
Zone Alias The zone alias.
Right and left arrow buttons Click to move the switches back and forth between the Available
Switches table and the Selected Switches table.
Selected Switches table Lists the switches selected as the destination switches.
Switch Name The name of the switch selected to be the destination switch.
IP The IP address of the switch selected to be the destination switch.
WWN The world wide name of the switch selected to be the destination switch.
Current Firmware The current firmware.
Status The status of the switch .
TABLE 42 Step 6. Validation
Field/Component Description
Validation Settings table The replication settings that have been configured in previous steps; for
example, the configuration type, source configuration, and destination
settings. Click Finish to approve the settings.
TABLE 43 Step 7. Summary
Field/Component Description
Summary table The replication settings that have been successfully applied to the
selected destination switches; for example, the configuration type,
source configuration, and destination settings. Click Close to close the
dialog box.
TABLE 41 Step 5. Destination Switches (Continued)
Field/Component Description