Brocade Network Advisor SAN User Manual v12.0.0 (53-1002696-01, April 2013)

336 Brocade Network Advisor SAN User Manual
53-1002696-01
Configuration repository management
12
4. Click Export.
The configuration is automatically named (Device_Name_Date_and_Time) and exported to the
location you selected.
Importing a configuration
NOTE
This feature requires a Trial or Licensed version.
1. Right-click a device in the Product List or the Connectivity Map, and select Configuration >
Configuration Repository.
The Switch Configuration Repository dialog box displays.
2. Click Import.
The file chooser appropriate to your operating system displays.
3. Use the file chooser to select the file from which you want to import the configuration, and click
Import.
Keeping a copy past the defined age limit
NOTE
This feature requires a Trial or Licensed version.
1. Select Configure > Configuration > Configuration Repository.
The Switch Configuration Repository dialog box displays.
2. Select the check box under Keep for the configuration you want to preserve. The configuration
will be kept until it is manually deleted, or until the Keep check box is cleared to enable the age
limit again.
3. Click OK.
Replicating configurations
NOTE
This feature requires a Trial or Licensed version.
You can replicate a switch SNMP configuration, the Fabric Watch configuration, Trace Destination
configuration, or the entire configuration.
Select Configuration > Replicate > Configuration.
A wizard is launched to guide you through the process. The first step of the wizard, Overview,
displays. There are seven steps in the Replicate Switch Configuration:
1. Overview, which describes the wizard.
2. Configuration Type, which allows you to select the type of configuration you wish to replicate.
For more information about the fields and components of this step, refer to Table 38 on
page 337.